Welcome To 3-Hack The Best

Desing By Mc-keny
ForumForum  PortalliPortalli  PytėsoriPytėsori  KėrkoKėrko  RegjistrohuRegjistrohu  Lista AnėtarėveLista Anėtarėve  Grupet e AnėtarėveGrupet e Anėtarėve  identifikimiidentifikimi  

Share | 

 Si Me Ndrysh IP Tende

Shko poshtė 

Numri i postimeve : 205
Age : 29
Registration date : 27/04/2007

MesazhTitulli: Si Me Ndrysh IP Tende   Sat Apr 28, 2007 3:07 am


. Click on "Start" button in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

*Note* This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back.

If you on a network running DHCP, here's a faster way:

Open CMD (Start - Run - CMD - Enter)

Type the following:

ipconfig (Press Enter)
ipconfig /release (Press Enter)
ipconfig /renew (Press Enter)
ipconfig (Press Enter)

Exit CMD.

Now, the first ipconfig is to show your current ip settings, and the second one is to verify that they changed to a new ip addy.

Rep me if u like this,


Mbrapsht nė krye Shko poshtė
Shiko profilin e anėtarit http://www.3hack-crew.com
Si Me Ndrysh IP Tende
Mbrapsht nė krye 
Faqja 1 e 1

Drejtat e ktij Forumit:Ju nuk mund ti pėrgjigjeni temave tė kėtij forumi
Welcome To 3-Hack The Best :: 3-Hack Control Panel :: Tutorials edhe mesime-
Kėrce tek: